Eco-Bond Usage Directions


  1. Prepare surfaces by cleaning them of dust, dirt, oil, or frost.
  2. Make sure Eco-Bond is at least room temperature & insert tube into standard caulking gun.
  3. Cut nozzle at 45 degree angle to desired size.
  4. Puncture inner seal with nail or wire.
  5. After applying Eco-Bond, materials may be repositioned for up to 20 minutes.
  6. Materials such as glass, metal & plastics will cure faster if the surfaces are lightly misted with water.
  7. Paintable after tack free. Works well with acrylic, latex & many oil based paints. When using with oil based paints, test on a small area or use a latex primer.


Remove with dry cloth or a light solvent such as mineral spirits.


Allow unused portions to air-dry before placing in normal refuse container for disposal. Do not dispose of partial used cartridges in fires.


Uncured adhesive irritates eyes. In case of contact, immediately flush with water for at least 25 minutes. Call a physician. Avoid prolonged contact with skin. Keep out of reach of children.


Eco-Bond Adhesives does not guarantee that any hazards that we may mention are the only hazards that exist. User is responsible to determine the suitability of this product for the user's intended application. User is responsible for determining that he can meet all applicable health & safety standards & regulations. We have no control over transportation, storage, handling & use of our products & we will not be liable for any damages resulting from use.  Please note the is a re-seller of the Eco-Bond Adhesives & Sealants and not a manufacturer of the products.  For further information, please visit the Eco-Bond Adhesives & Sealants web site.


Limited time offer: 35 % OFF
HD 100 and LD 50

FREE Shipping on orders over $120
Customer Discount Login  Contact us to find out more

ECO-BOND Adhesive & Sealants

Product Videos

Green Facts

  • Zero VOC's
  • Non-petroleum based
  • Exceeds all CA Standards
  • Non Toxic
  • Solvent free
  • Waterproof
  • Low odor
  • No Prop 65 listed materials
  • UV resistant
  • Earns LEED & NAHB Green Building Points